Hyundai Sonata LF: Body Electrical System / Windshield Deicer

Hyundai Sonata LF 2014-2019 Service Manual / Body Electrical System / Windshield Deicer

Components and Components Location

Component Location

Windshield deicer system prevent windshield wiper from freezing in the winter season. It consists of deicer in the lower part of windshield, switch and relay. Body control module receives an input signal from the front defroster switch, then controls relay.

When the front defroster switch is switched ON, and the engine is running with generator output, the deicer will go ON for a maximum of 20 minutes.

1. Windshield deicer relay Smart Junction Block (SJB)
2. Windshield deicer switch

3. Deicer connector
4. Windshield deiecr

Windshield Deicer Repair procedures

Inspection

1.	Remove the cowl top cover. (Refer to Body - "Cowl Top Cover")

2.	Disconnect the windshield deicer connector (A).

3.	Check for continuity between the terminals of deicer lines.

Turn the ignition switch ON and the windshield deicer switch ON, then measure the voltage between the terminals of harness side deicer connector.

OK : approx. Battery voltage (12V)

Windshield Deicer Switch Repair procedures

Inspection

The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS).

The diagnostic system (GDS) provides the following information.

(1)	Self diagnosis : Checking the failure code (DTC) and display

(2)	Current data : Checking the system input/output data state

(3)	Actuation test : Checking the system operation condition

(4)	Additional function : Other controlling such as he system option and zero point

2.	Select the "Car Model" and the system to be checked in order to check the vehicle with the tester.

3.	Select the "Smart Junction Box (SJB)" to check the windshield deicer.

4.	Select the "Current Date" menu to search the current state of the input/output data. The input/output data for the sensors corresponding to the 'Smart Junction Box (SJB)' can be checked.

5.	Select "Actuation Test", if you want to check the Smart Junction Box (SJB) data operation forcefully.

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the heater and A/C controll unit. (Refer to Heating, Ventilation, Air conditioning - "Heater & A/C Control Unit (Dual)")

Installation

1.	Install the heater and A/C control unit.

2.	Connect the negative (-) battery terminal.

Power Window Switch Repair procedures

Inspection Diagnosis with GDS 1. The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). The diagnostic system (GDS) provides the following information...

Rear Glass Defogger

Components and Components Location Component Location 1. Rear glass defogger relay Smart Junction Block (SJB)2. Rear glass defogger switch3. Rear glass defogger Rear Glass Defogger Printed Heater Repair procedures Inspection Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: High Pressure Fuel Pump Repair procedures

Removal Whenever the high pressure fuel pump, fuel pipe, deliverypipe, or injector is removed immediately after shutting offthe engine, an injury may be caused by the release ofhighly pressurized fuel. Release the residual pressure inthe high pressure fuel line by referring to the "Residualfuel pressure release procedure" before removingany high pressure fuel system components...

Hyundai Sonata LF 2014-2019 Service Manual: Airbag Module Disposal Description and Operation

Airbag Disposal Special tool required Deployment tool 0957A-34100A Before scrapping any airbags or side airbags (including those installed in vehicle to be scrapped), the airbags or side airbags must be deployed. If the vehicle is still within the warranty period, before deploying the airbags or side airbags, the Technical Manager must give approval and/or special instruction...