Hyundai Sonata: ESP(Electronic Stability Program) System / Steering Angle Sensor Specifications

Specification
Service Standard
Description
Specification
Operating voltage
8 ~ 16V
Operating temperature
-40 ~ 85°C(-40 ~ 185°F)
Current consumption
Max.150mA
Measuring range
Angle
-780 ~ 779.9°
Angular velocity
0 ~ 1016°/sec
Output signal
CAN Interface

ESP OFF Switch Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. 3. Check the continuity between the switch terminals as ...

Steering Angle Sensor Description and Operation
Description Steering Wheel Angle Sensor detects rotating direction of the vehicle. Rotating direction detected by the sensor is communicated with HECU as CAN signal involving information about ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Repair procedures
Service Point Target Auto Calibration (SPTAC) This procedure provides a way to calibrate the camera by having the service technician align the car to a well lit simulated straight road target; preferably wall mounted. The LDWS camera will have a "System Out of Calibration" DTC set if not op ...

Hyundai Sonata LF 2014-2019 Service Manual: Inhibitor Switch Troubleshooting
Fault Diagnosis Fault Diagnosis for Symptom Major Symptom Expected Cause Items to Check and Measures Shift lever not operating Gear not marked on cluster Shock occurs while shifting lever Warning lamp ON Engine OFF while vehicle is parked Inhibitor switch circuit abnor ...

© 2018-2025 www.hsonatalf.org