Hyundai Sonata: Body Side Molding / Rear Wheel Guard Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting clips and screws, then remove the rear wheel guard (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Wheel Guard Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...

Fender Garnish Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pro ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Specifications
Specification Ignition System Ignition Coil ItemSpecification Primary Coil Resistance (?)0.56 ± 10% [20°C (68°F)]Secondary Coil Resistance (k?)2.0 ± 15% [20°C (68°F)] Spark Plug ItemSpecificationTypeSILZKR7E8GGap0.7 ~ 0.8 mm (0.0275 ~ 0.0314 in.) Charging System Alte ...

Hyundai Sonata LF 2014-2019 Owners Manual: Windshield Washers
In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. The spray and wiper operation will continue until you release the lever. If the washer does not work, you may need to add washer fluid to the washer fluid reservoir. If ...

© 2018-2023 www.hsonatalf.org