| Inspection |
| 1. |
Disconnector the negative (-) battery terminal. |
| 2. |
Remove the overhead console. |
| 3. |
Remove the overhead console cover after loosening the screws.
|
| 4. |
Check the continuity of between terminals.
|
AUX jack Repair proceduresRemoval 1. Disconnect the battery (-) terminals. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly") 3. Remove the multimedia jack (A) after disconnect the connector and loosening the mounting screws...
BLUE LINK..
Inspection 1. Fuse inspection Mount the test fuse to the switch fuse and relay fuse part to confirm a normal joint fit. 2. Inspection of connector by each part Check to see whether or not each connector has been damaged, or terminal surge, or incomplete connection has taken place [Engine room junction box] [Stop signal electronic module] [ABS/VDC control module] 3...
Inspection Front Seat Heater 1. Check for continuity and measure the resistance between terminals No 3 and No 6. Standard value Driver / Assists (cushion + back) : 1.58±10% 2. Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface...