Consult an authorized HYUNDAI dealer to replace most vehicle light bulbs. It is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true for removing the headlamp assembly to get to the bulb(s).
Removing/installing the headlamp assembly can result in damage to the vehicle.
Information
After heavy driving, rain or washing, headlamp and trunk lenses could appear frosty. This condition is caused by the temperature difference between the lamp inside and the outside temperature. This is similar to the condensation on your windows inside your vehicle during the rain and doesn’t indicate a problem with your vehicle. If the water leaks into the lamp bulb circuitry, have your vehicle checked by an authorized HYUNDAI dealer.
WARNING
Absorbent
This vehicle contains a dehumidifying dehumidifier inside the headlamp to mitigate the blurring of the headlamp due to moisture.
The desiccant is a consumable part and its performance may change depending on the usage time or environment.
If the inside of the headlamp continues to become cloudy due to moisture, we recommend that you consult an authorized HYUNDAI dealer.
The desiccant is a consumable part and cannot be guaranteed.
Hyundai Sonata LF 2014-2019 Service Manual: Description and Operation
Description
The Tire Pressure Monitoring System (TPMS) monitors the
pressure and temperature inside the tire in order to warn the driver of
changes in pressure which may influence the operation of the vehicle.
The TPMS control module analyzes wireless information fro
In other words, the s ...
Hyundai Sonata LF 2014-2019 Service Manual: Blind Spot Detection Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper.
(Refer to Body - "Rear Bumper")
3.
Remove the BSD unit (A) after loosening the mounting nuts.
Take care not to separate the bracket from rear bumper when removing the BSD sensor.
...