Hyundai Sonata LF: Dual Clutch Transmission Control System / Input shaft speed sensor 1 Schematic Diagrams

Input shaft speed sensor 1 Description and Operation

Description • Components location : DCT (Dual Clutch Transmission) • Function The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM)...

Input shaft speed sensor 1 Repair procedures

Removal 1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechnical System - "Air cleaner") 2. Remove the TCM. (Refer to Dual Clutch Transmission Control System - "TCM") 3...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Description and Operation

Description BSD is a system that uses two magnetic wave radar sensors attached on the rear panel to measure the distance from the following vehicles and provides the sensing and (visual and auditory) alarm of any vehicle coming into the blind spot...

Hyundai Sonata LF 2014-2019 Service Manual: Immobilizer Control Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the knee airbag module. (Refer to Restraint - "Knee Airbag (KAB) Module") 4. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a nut...