| Description |

Ignition Coil Repair proceduresRemoval 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the engine cover. 3. Disconnect the ignition coil connector (A)...
Removal 1. Remove the engine cover. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Remove the air duct and air cleaner assembly. (Refer to Intake and Exhaust System - "Air Cleaner") 4. Remove the engine room under cover...
Removal and Installation 1. Crankshaft damper pulley. (Refer to Timing System - "Damper Pulley") 2. Remove the front oil seal. Using the SST (09455-21200), reassemble the timing chain cover oil seal. 3. Install in the reverse order of removal...