Hyundai Sonata LF: Ignition Switch Assembly / Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Body Electrical System / Ignition Switch Assembly / Repair procedures

Replacement

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to Body - "Crash Pad")

3.	Remove the steering column upper & Lower shroud.

4.	Remove the ignition switch (A) and disconnecting the Key Warning / immobilizer connector.

5.	If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder (A) after pushing lock pin (B) with key ACC.

6.	Installation is the reverse of removal procedure.

Inspection

1.	Disconnect the ignition switch connector (A) and key warning switch connector (B) from under the steering column.

2.	Check for continuity between the terminals.

3.	If continuity is not specified, replace the switch.

Ignition Switch Assembly

Lane Departure Warning System (LDWS)

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Rear Package Tray Trim Repair procedures

Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage...

Hyundai Sonata LF 2014-2019 Service Manual: Rear Stabilizer Bar Repair procedures