| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad") |
| 3. |
Remove the steering column upper & Lower shroud. |
| 4. |
Remove the ignition switch (A) and disconnecting the Key Warning / immobilizer connector.
|
| 5. |
If it is necessary to remove the key lock cylinder (A),
remove the key lock cylinder (A) after pushing lock pin (B) with key
ACC.
|
| 6. |
Installation is the reverse of removal procedure. |
| Inspection |
| 1. |
Disconnect the ignition switch connector (A) and key warning switch connector (B) from under the steering column.
|
| 2. |
Check for continuity between the terminals. |
| 3. |
If continuity is not specified, replace the switch.
|
Antenna Coil Repair proceduresRemoval 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A) after loosening the screw...
Removal 1. Loosen the drain plug (A), and drain the engine coolant. Remove the radiator cap to drain with speed. System is under high pressure when the engine is hot.To avoid danger of releasing scalding engine coolant, remove the cap only when the engine is cool...
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage...