| Replacement |
| 1. |
Remove the hole plug (B). |
| 2. |
After loosening the mounting bolt, then remove the rear door outside handle cover (A).
|
| 3. |
Remove the rear door outside handle (A) by sliding it rearward.
|
| 4. |
Install in the reverse order of removal.
|
Rear Door Belt Outside Weatherstrip Repair proceduresReplacememt 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door belt outside weatherstrip (A)...
Removal When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. [In the case of installing used ECM] 1. Perform "Neutral mode" procedure with GDS. (Refer to "Immobilizer" in BE group) 2...
Removal 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap (A). Be careful not to damage to the wheel cap (A) when removing the it. 3. Remove the front wheel and tire (A) from front hub...