Hyundai Sonata LF: Timing System / Idler Components and Components Location

Drive Belt Repair procedures

Removal 1. Disconnect the battery negative terminal. 2. Loosen the alternator tension adjusting bolt (A) to loosen tension. 3. Remove the drive belt (A)...

Idler Repair procedures

Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the idler (A). Tightening torque : 42...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Air Ventilation Seat Repair procedures

Removal [Ventilation Blower] 1. Disconnect the negative (-) battery terminal. 2. Remove the front seat. (Refer to Body - "Front Seat Assembly") 3. Remove the under cover assembly. (Refer to Body - "Front Seat Cushion Cover") 4. Remove the blower fan (A) after removing the fixed clip (B) and screws...

Hyundai Sonata LF 2014-2019 Service Manual: Ambient Temperature Sensor Description and Operation

Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control...