Hyundai Sonata LF: Timing System / Idler Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Engine Mechanical System / Timing System / Idler Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the idler (A).

Tightening torque :
42.2 ~ 53.9 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.

    Idler Components and Components Location

    C..

    Drive Belt Tensioner Components and Components Location

    C..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Seat Belt Buckle Switch (BS) Description and Operation


    Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return...

    Hyundai Sonata LF 2014-2019 Service Manual: Advanced Smart Cruise Control (ASCC) Unit-Radar Description and Operation


    Description The smart cruise control unit is installed on the front right side of the chassis.A radar sensor is embedded in the front section of the unit. This sensor detects vehicles and objects in front of the vehicle.The radar sensor can detect up to 64 objects ahead of a vehicle...

    Categories

    read more

     
    Copyright В© 2026 www.hsonatalf.org