| Specification |
| Item | Specification |
| Power supply(V) | 12 |
| Operation voltage (V) | 9 ~ 16 |
Advanced Smart Cruise Control (ASCC) Unit-Radar Description and OperationDescription The smart cruise control unit is installed on the front right side of the chassis.A radar sensor is embedded in the front section of the unit...
Waveform This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these signals. Generally CkPS signal is used to detect the piston's position and CMPS signal is used to detect the Top Dead Center of each cylinder...
Failure Diagnosis 1. In principle, ESP and TCS controls are prohibited in case of ABS failure. 2. When ESP or TCS fails, only the failed system control is prohibited. 3. However, when the solenoid valve relay should be turned off in case of ESP failure, refer to the ABS fail-safe...