| Removal and Installation |
| 1. |
Remove the engine cover (A).
|
| 2. |
Install in the reverse order of removal. |
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the engineroom under cover. 3. Remove the passenger side front tire. 4. Remove the crankshaft damper pulley (A). Tightening torque : (47...
Inspection 1. Connect a GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable...