Hyundai Sonata LF: Engine Control System / Crankshaft Position Sensor (CKPS) Description and Operation
Hyundai Sonata LF 2014-2019 Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS) Description and Operation
| Description |
Crankshaft Position Sensor (CKPS) detects the crankshaft
position and is one of the most important sensors of the engine control
system. If there is no CKPS signal input, the engine may stop because of
CKPS signal missing.
This sensor is installed in ladder frame and generates
alternating current by magnetic flux field which is made by the sensor
and the target wheel when the engine rotates. The target wheel consists
of 58 slots and 2 missing slots on 360 CA (Crank Angle).
Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Center Pillar Trim Components and Components Location
C..
Hyundai Sonata LF 2014-2019 Service Manual: Brake Line Repair procedures
Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe. Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water...
Categories
- Manuals Home
- Hyundai Sonata Owners Manual
- Hyundai Sonata Service Manual
- Engine Electrical System
- Suspension System
- Engine And Transmission Assembly
- New on site
- Most important about car
Copyright В© 2026 www.hsonatalf.org