| Specification |
| Item | Specification |
| Coil Resistance (?) | 774 ~ 946 [20°C (68°F)] |
Crankshaft Position Sensor (CKPS) Description and OperationDescription Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system...
Crankshaft Position Sensor (CKPS) TroubleshootingWaveform This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these signals...
Removal • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s). • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor...
Replacement 1. Using a socket (B), remove the hood release handle (A). 2. Install in the reverse order of removal. • Make sure the hood latch cable is connected properly. • Make sure the hood locks / unlocks and opens / closes properly...