| Components |

| 1. Timing chain 2. Timing chain guide 3. Timing chain arm 4. Timing chain auto tensioner 5. Timing chain cover 6. Drive belt idler 7. Water pump gasket | 8. Water pump 9. Water pump pulley 10. Crank shaft pulley 11. Front oil seal 12. Alternator bracket 13. Tension adjust bolt 14. Drive belt |
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: Refer to “Specification” Removal 1...
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the engine cover. 3. Disconnect the ignition coil connector (A). 4. Remove the ignition coil (A). • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B)...