| Specification |
| Accelerator Position | Output Voltage (V) | |
| APS1 | APS2 | |
| C.T | 0.7 ~ 0.8 | 0.29 ~ 0.46 |
| W.O.T | 3.85 ~ 4.35 | 1.93 ~ 2.18 |

Accelerator Position Sensor (APS) Description and OperationDescription Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal...
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal • DON’T remove the camshaft position sensor while the engine is running or right after engine is turned off...
Replacement 1. Remove the tire. (Refer to Tires/Wheels - "Tire") 2. Remove the screw with torx driver (A). • When installing the bead brake, make sure that it does not come in contact with the TPMS sensor. • Be careful not to damage the TPMS sensor when installing the bead brake near the TPMS sensor...