Hyundai Sonata LF: Cylinder Block / External Damper Flywheel Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Engine Mechanical System / Cylinder Block / External Damper Flywheel Repair procedures

Removal and installation
1.
Remove the dual clutch transmission.
(Refer to Dual Clutch Transmisson(DCT) - "Dual Clutch Transmisson Assembly")
2.
Remove the external damper (A).
Tightening torque :
71.5 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.6 lb-ft)

3.
Install in the reverse order of removal.

    External Damper Flywheel Components and Components Location

    C..

    Water Jacket Seperator Components and Components Location

    C..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Water Temperature Control Assembly Components and Components Location


    C..

    Hyundai Sonata LF 2014-2019 Service Manual: Side Body Body Repair


    Side Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side Body B * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Fender apron tooling hole (O7)Fender apron panel tooling hole (O7)Front door upper hinge mounting hole (O13)Front door lower hinge mounting hole (O13)Rear door upper hinge mounting hole (O13)Rear door lower hinge mounting hole (O13)Quarter panel tooling hole (O14)Quarter fixed glass mounting hole (O5...

    Categories

    read more

     
    Copyright В© 2025 www.hsonatalf.org