Hyundai Sonata LF: Cooling System / Cooling Fan Specifications

Hyundai Sonata LF 2014-2019 Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Specifications

Specification
??
??
Motor capacity (W)
170CTAX12
200
Fan type
Puller
Fan speed control
Resiser (HI-LOW-OFF )
Air volume (?/h)
2,650 -8% min.
2,800 min.
PRM
1,700 ±8%
1,800 ±8%
Current consumption (A)
14.2 +10% max.
17.3 +10% max.

    Cooling Fan Description and Operation

    Description Cooling fan is operated by 2 step (High/Low) and control in according to coolant temperature, vehicle speed and ON/OFF of air conditioner in engine ECM...

    Cooling Fan Schematic Diagrams

    C..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Side Impact Sensor (SIS) Repair procedures


    Removal Pressure Side Impact Sensor     • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnecting the side impact sensor connector(s), disconnect the side airbag connector(s)...

    Hyundai Sonata LF 2014-2019 Service Manual: Injector Repair procedures


    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: Refer to “Specification” Removal     In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel...

    Categories

    read more

     
    Copyright © 2026 www.hsonatalf.org