| Specification |
| Temperature[°C(°F)] | Resistance(k?) | ||
| -40(-40) | 841.2~1019.3 | ||
| -20(-4) | 263.8~306.5 | ||
| 0(32) | 92.4~102.8 | ||
| 10(50) | 57.0~62.2 | ||
| 20(68) | 36.2~38.8 | ||
| 40(104) | 15.3~16.7 | ||
| 50(122) | 10.3~11.4 | ||
| 60(140) | 7.1~8.0 | ||
| 80(176) | 3.5~4.0 |
Ambient Temperature Sensor (ATS) Description and OperationDescription Ambient Temperature Sensor (ATS) is installed on the front-end module and senses the ambient temperature. ECM receives not only the intake air temperatue but also the ambient air temperature informations at the same time to control the intake air quantity precisely provided through the turbo charger...
Removal 1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - "Release Residual Pressure in Fuel Line") 2. Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly") 3. Remove the fuel pump service cover (A) in the trunk...
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization phase and be turned off afterward...