Hyundai Sonata: Smart Cruise Control Speed / To resume Smart Cruise Control set speed
.jpg)
If any method other than the CRUISE toggle switch was used to cancel cruising speed and the system is still activated, the cruising speed will automatically resume when you push the toggle switch up (RES+) or down (SET-).
If you push the toggle switch up (RES+), the speed will resume to the recently set speed. However, if vehicle speed has dropped below approximately 20 mph (30 km/h), it will resume when there is a vehicle in front of your vehicle.
CAUTION
Always check the road conditions when you push the toggle switch up (RES+) to resume speed.
Smart Cruise Control will be temporarily canceled when
Canceled manually
Depressing the brake pedal.
Pressing the CANCEL button located on the steering wheel.
The Smart Cruise Control turns off temporarily when the indicator on the LCD
display turns ...
To turn Cruise Control off
Push the CRUISE button (the CRUISE indicator light will go off). ...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Rail Pressure Sensor (RPS) Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe
and measures the instantaneous fuel pressure in the delivery pipe. The
sensing element (Semiconductor element) built in the sensor converts the
pressure to voltage signal. By using this signal, the ECM can control
co ...
Hyundai Sonata LF 2014-2019 Service Manual: Engine Cover Repair procedures
Removal and Installation
1.
Remove the engine cover (A).
2.
Install in the reverse order of removal. ...
