Hyundai Sonata: Body Side Molding / Side Sill Molding Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Loosen the side sill molding mounting screw and retaner.
2.
Using a screwdriver or remover, remove the side sill molding (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Rear Mud Guard Repair procedures
Replacement     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to ...

Panorama Sunroof
...

Other information:

Hyundai Sonata LF 2014-2019 Owners Manual: Turn signals and lane change signals
To signal a turn, push down on the lever for a left turn or up for a right turn in position (A). To signal a lane change, move the turn signal lever slightly and hold it in position (B).The lever will return to the OFF position when released or when the turn is completed. If an indicator stays o ...

Hyundai Sonata LF 2014-2019 Owners Manual: Air ventilation seats
The air ventilation seats are provided to cool the front seats by blowing air through small vent holes on the surface of the seat cushions and seatbacks. When the operation of the air ventilation seats are not needed, keep the switches in the OFF position. While the engine is running, push the sw ...

© 2018-2025 www.hsonatalf.org