| Inspection |
| 1. |
After disconnecting the vapor hose from the PCV valve, remove the PCV valve. |
| 2. |
Reconnect the PCV valve to the vapor hose. |
| 3. |
Inspect the PCV vlave operation.
|
| 4. |
If the vacuum is not felt, clean or replace the vapor hose. |
C..
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk lid panel. (Refer to Body - "Trunk Lid Trim") 3. Remove the license lamp after disengaging the license lamp mounting clip (A). 4. Remove the license lamp assembly after disconnect the license connector (A)...