| Schematic Diagram |

Repair proceduresInspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3...
Inspection [Motor] 1. Turn ignition switch OFF. 2. Disconnect the EWGA connector. 3. Check that the EWGA is stuck by foreign material. 4. Measure resistance between motor (+) and (-) control terminals of the motor. 5. Check that the resistance is within the specification...
Removal OCS ECU 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front passenger seat assembly. (Refer to Body - "Front Seat Assembly") 3. Disconnect the OCS ECU connector (A)...