Hyundai Sonata: Rear Seat Belt / Rear Seat Belt Buckle Repair procedures

Replacement
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

[RH]

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
Rear Seat Belt Buckle Components and Components Location
Component Location 1. Rear seat belt buckle [RH]2. Rear seat belt buckle [LH] ...

Body Electrical System
...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Blind Spot Detection Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting nuts.     Take care not to separate the bracket from rear bumper when removing the BSD sensor. ...

Hyundai Sonata LF 2014-2019 Service Manual: Drive Belt Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Loosen the alternator tension adjusting bolt (A) to loosen tension. 3. Remove the drive belt (A). Inspection Drive Belt Inspection Visually check the belt for excessive wear, frayed cords etc. If any defect has been found, rep ...

© 2018-2022 www.hsonatalf.org