Hyundai Sonata: SRSCM / Occupant Classification Sensor (OCS) Description and Operation

Hyundai Sonata LF 2014-2019 Service Manual / Restraint / SRSCM / Occupant Classification Sensor (OCS) Description and Operation

Description
In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Occupant Classification System (OCS). If the seat is occupied, OCS detects passenger presences status and send signal to SRSCM via CAN.
SRSCM recognizes the signal as 2(two) different classifications; that is, 1(Empty or small occupant with child restraint system), 2(Occupied with large occupant and small occupant).
With these signal, ACU determines whether it needs to deploy the PAB(Passenger Airbag) or not.
Occupant Classification Sensor (OCS) Components and Components Location
Components ...

Occupant Classification Sensor (OCS) Repair procedures
Removal OCS ECU 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front passenger seat assembly. (Refer to Body - "Front Sea ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Crash Pad Garnish Assembly [RH] Components and Components Location
Component Location 1. Crash pad garnish assembly [RH] ...

Hyundai Sonata LF 2014-2019 Service Manual: Idler Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the idler (A). Tightening torque : 42.2 ~ 53.9 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft) 3. Install in the reverse order of removal. ...

© 2018-2021 www.hsonatalf.org