| Specification |
| Item | Specification |
| Resistance(M?) | 4.87 |
Knock Sensor (KS) Description and OperationDescription Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking...
Components and Components Location Component Location 1. DDM (Driver Door Module)2. ADM (Assist Door Module)3. SJB (Smart Junction Block)4. Door lock knob5. Trunk lid actuator6. Door latch module7. Door lock/unlock switch8. RLDM (Rear Left Door Module)9...
Removal 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the floor console assembly. (Refer to Body - “Floor console assembly") 3. Remove the EPB switch after loosening the screws. 4. Install in the reverse order of removal...