Hyundai Sonata: Body Electrical System / Indicators And Gauges
- Instrument Cluster Components and Components Location
- Instrument Cluster Schematic Diagrams
- Instrument Cluster Description and Operation
- Instrument Cluster Repair procedures
- Troubleshooting
Relay Box (Passenger Compartment) Repair procedures
Fuse Inspection
1.
Be sure there is no play in the fuse holders, and that the fuses are held securely.
2.
Are the fuse capacities for each circuit correct?
3.
Are there any blown fuses?
...
Instrument Cluster Components and Components Location
Components
Connector Pin Information
NoDescriptionNoDescription1-21Speaker (+)2Illumination (-)22Speaker (+)3Rheostat switch (Down)_Input23Immobilizer_Input4Rheostat switch (Up)_Input24AT ('P' Pos ...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification: Refer to “Waveform”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) af ...
Hyundai Sonata LF 2014-2019 Service Manual: Power Window Switch Description and Operation
Description
System Diagram
Driver Door Module (DDM)
Driver Door Module (DDM) is part of CAN configuration,
communicating with BCM, SMK, SJB, PSM, and ADM via CAN while performing
wired signal I/Os with safety power windows.
Operate the buttons of DDM located on the inner side of the
...
