| Circuit Diagram |

| Terminal function |

| Pin NO. | Discription |
| 1 | Battery (+) |
| 2 | IGN |
| 3 | CAN_Low |
| 4 | CAN_High |
| 5 | - |
| 6 | Ground |
TPMS Receiver Description and OperationDescription 1. Mode (1) Virgin State A. The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state...
TPMS Receiver Repair proceduresReplacement 1. Disconnect the negative (-) battery cable. 2. Remove the glove box. (Refer to Body - "Crash Pad") 3. Remove faulty part and fit bracket assembly to new part...
Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The measured resistance at high temperature after vehicle running may be high or low...
Inspection Transmission Control Module (TCM) Inspection Procedure 1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the terminal connected to the chassis ground while using the back of the harness connector as the base point for TCM...