Hyundai Sonata LF: Brake System / Stop Lamp Switch Description and Operation

Hyundai Sonata LF 2014-2019 Service Manual / Brake System / Brake System / Stop Lamp Switch Description and Operation

Description
The stop lamp switch plays the role of supplying signals to turn on stop lamps and convenience devices (HECU,ECU,BCM,SMK etc.) for drivers as a system that expresses the driver's intentions to brake by pressing the brake pedal.

    Stop Lamp Switch Components and Components Location

    ..

    Stop Lamp Switch Schematic Diagrams

    S..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: DCT Control Module (TCM) Repair procedures


    Inspection Transmission Control Module (TCM) Inspection Procedure 1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the terminal connected to the chassis ground while using the back of the harness connector as the base point for TCM...

    Hyundai Sonata LF 2014-2019 Service Manual: Front Door Side Weatherstrip Repair procedures


    Replacement 1. Loosen the front door checker (B) mounting bolt. 2. Detach the clips, then remove the front door side weatherstrip (A). Tightening torque : 16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m, 12.3 ~ 15.9 lb-ft) 3. Install in the reverse order of removal...

    Categories

    read more

     
    Copyright В© 2026 www.hsonatalf.org