Hyundai Sonata LF: Brake System / Stop Lamp Switch Components and Components Location

Hyundai Sonata LF 2014-2019 Service Manual / Brake System / Brake System / Stop Lamp Switch Components and Components Location

Components Location

1. Brake pedal member assembly
2. Stop lamp switch
3. Bolt
4. Return spring
5. Brake pedal assembly
6. Locking plate

    Rear Disc Brake Repair procedures

    Removal [General Type] 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap(A).     Be careful not to damage to the wheel cap(A) when removing the it...

    Stop Lamp Switch Description and Operation

    Description The stop lamp switch plays the role of supplying signals to turn on stop lamps and convenience devices (HECU,ECU,BCM,SMK etc.) for drivers as a system that expresses the driver's intentions to brake by pressing the brake pedal...

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Main Crash Pad Assembly Components and Components Location


    C..

    Hyundai Sonata LF 2014-2019 Service Manual: CVVT Oil Control Valve (OCV) Description and Operation


    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which makes better fuel economy and reduces exhaust gases (NOx, HC) and improves engine performance through reduction of pumping loss, internal EGR effect, improvement of combustion stability, improvement of volumetric efficiency, and increase of expansion work...

    Categories

    read more

     
    Copyright В© 2026 www.hsonatalf.org