Hyundai Sonata LF: ESP(Electronic Stability Program) System / Steering Angle Sensor Specifications

Hyundai Sonata LF 2014-2019 Service Manual / Brake System / ESP(Electronic Stability Program) System / Steering Angle Sensor Specifications

Specification
Service Standard
Description
Specification
Operating voltage
8 ~ 16V
Operating temperature
-40 ~ 85°C(-40 ~ 185°F)
Current consumption
Max.150mA
Measuring range
Angle
-780 ~ 779.9°
Angular velocity
0 ~ 1016°/sec
Output signal
CAN Interface

    ESP OFF Switch Repair procedures

    Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. 3. Check the continuity between the switch terminals as the ESP OFF switch is engaged...

    Steering Angle Sensor Description and Operation

    Description Steering Wheel Angle Sensor detects rotating direction of the vehicle. Rotating direction detected by the sensor is communicated with HECU as CAN signal involving information about the angle through CAN communication line...

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Knee Airbag (KAB) Module Repair procedures


    Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the mounting nuts (A). 4. Disconnect the knee airbag connector (B)...

    Hyundai Sonata LF 2014-2019 Service Manual: Repair procedures


    General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection...

    Categories

    read more

     
    Copyright © 2026 www.hsonatalf.org