Hyundai Sonata LF: ESP(Electronic Stability Program) System / Steering Angle Sensor Description and Operation

Hyundai Sonata LF 2014-2019 Service Manual / Brake System / ESP(Electronic Stability Program) System / Steering Angle Sensor Description and Operation

Description
Steering Wheel Angle Sensor detects rotating direction of the vehicle. Rotating direction detected by the sensor is communicated with HECU as CAN signal involving information about the angle through CAN communication line.
HECU detects speed of the steering wheel handling and the angle with this CAN signal. HECU also uses this signal as the input signal to control anti-roll.

    Steering Angle Sensor Specifications

    Specification Service Standard DescriptionSpecificationOperating voltage8 ~ 16VOperating temperature-40 ~ 85°C(-40 ~ 185°F)Current consumptionMax...

    Steering Angle Sensor Schematic Diagrams

    S..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: A/C Pressure Transducer Description and Operation


    Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very low irregularly to optimize air conditioning system...

    Hyundai Sonata LF 2014-2019 Service Manual: Seat Heater Repair procedures


    Inspection Front Seat Heater 1. Check for continuity and measure the resistance between terminals No 3 and No 6. Standard value Driver / Assists (cushion + back) : 1.58±10% 2. Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface...

    Categories

    read more

     
    Copyright © 2025 www.hsonatalf.org