| Removal |
| 1. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover") |
| 2. |
Remove the high pitch horn (A) and low pitch horn (B) after
disconnect the horn connector (C) and loosening the mounting the bolt.
|
| Installation |
| 1. |
Install the horns after connect the horn connectors. |
| 2. |
Install the front bumper cover. |
| Inspection |
| 1. |
The relay on the horn of this vehicle is implanted into the metal core block PCB of the engine room relay block. |
The relay inserted in semi-conductor chip type on the PCB is
not available for changing. The metal core boxy shall be tested by
exchanging when the relay shall be changed. |
Audio..
C..
Description The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal...