| Replacement |
| 1. |
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. |
| 2. |
Turn the steering wheel so that the front wheels can face straight ahead. |
| 3. |
Remove the airbag module.
|
| 4. |
Remove the DAB module.
|
| 5. |
Loosen the steering wheel lock bolt properly. Separate the steering wheel by using SST(09561-11001).
|
| 6. |
Loosen the steering wheel lock bolt completely, remove the steering wheel. |
| 7. |
Installation is the reverse of the removal. |
| Disassembly |
| 1. |
Disconnect the steering wheel remote switch connector (A) & (B).
|
| 2. |
Loosen the screw and then remove the lower cover.
|
| 3. |
Seperate the remote control switch from the steering wheel. |
| 4. |
Reassembly is reverse of the disassembly. |
Heated Steering wheel Description and OperationDescription Heated pads to grip the steering grip makes the fever. 1. Heated control unit TypeTemperatureRemarksLeather38°C±4°CApply to the entire lather surface 2...
Description • Components location : DCT (Dual Clutch Transmission) • Function - The inhibitor switch mounted on the upper of transaxle and connected with shifter lever. - The inhibitor switch has four points of contact and it makes the signals(S1, S2, S3, S4)...
Repair procedures ESP System bleeding This procedure should be followed to ensure adequate bleeding of air and filling of the ESC unit, brake lines and master cylinder with brake fluid. 1. Remove the reservoir cap and fill the brake reservoir with brake fluid...