| Replacement |
| 1. |
Loosen the rear door checker (B) mounting bolt. |
| 2. |
Detach the clips, then remove the rear door side weatherstrip (A).
|
| 3. |
Install in the reverse order of removal.
|
Rear Door Belt Outside Weatherstrip Repair proceduresReplacememt 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door belt outside weatherstrip (A)...
Inspection • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Inspection flow Items to check 1. Inspect DTC code. 2. Inspect whether N setting matches...
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Rmove the blind spot detection (BSD) switch (A) after disengaging the mounting clip. Installation 1. Install the crash pad side switch assembly after connecting the connector...