Hyundai Sonata LF: Lubrication System / Oil Pan Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Engine Mechanical System / Lubrication System / Oil Pan Repair procedures

Removal
1.
Remove the under covers.
2.
Drain engine oil.
3.
Using the SST (09215-3C000) and remove the oil pan.

   
•
Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of arrow.
•
After tapping the SST with a plastic hammer along the direction of arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.
•
Do not turn over the SST abruptly without tapping. It be result in damage of the SST.
Installation
1.
Install the oil pan.
(1)
Using a razor blade and gasket scraper, remove all the old packing material from the gasket surfaces.
   
Check that the mating surfaces are clean and dry before applying liquid gasket.
(2)
Apply liquid gasket as an even bead, centered between the edges of the mating surface.

Liquid gasket : TB 1217H or LOCTITE 5900H

   
•
To prevent leakage of oil, apply liquid gasket to the inner threads of the bolt holes.
•
Do not install the parts if five minutes or more have elapsed since applying the liquid gasket.
Instead, reapply liquid gasket after removing the residue.
•
After assembly, wait at least 30 minutes before filling the engine with oil.
(3)
Install the oil pan (A) with the bolts.
Uniformly tighten the bolts in several passes.

Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

2.
Refill engine oil.

    Oil Pan Components and Components Location

    C..

    Oil Level Gauge & Pipe Repair procedures

    Removal and Installation 1. Remove the oil lever gauge (A). Tightening torque: 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft) 2. Install in the reverse order of removal...

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Ambient Temperature Sensor (ATS) Description and Operation


    Description Ambient Temperature Sensor (ATS) is installed on the front-end module and senses the ambient temperature. ECM receives not only the intake air temperatue but also the ambient air temperature informations at the same time to control the intake air quantity precisely provided through the turbo charger...

    Hyundai Sonata LF 2014-2019 Service Manual: Oil Pressure Switch Repair procedures


    Removal and Installation 1. Remove the under cover. 2. Remove the oil drain plug, and drain the oil into a container. 3. Remove the oil pressure switch (A). Tightening torque : 7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft) 4...

    Categories

    read more

     
    Copyright © 2026 www.hsonatalf.org