| Components |

| 1. Front muffler 2. Center muffler 3. Main muffler | 4. Gas ket 5. Hanger |
Turbo Charger Repair proceduresOn-vehicle Inspection Turbocharger Diagnostic Flow If any problem related with turbocharger, such as lack of engine power, poor acceleration, abnormal engine noise or oil leaks, may occur, check the turbocharger according to the procedure as follows...
Muffler Repair proceduresRemoval and Installation Front Muffler 1. Disconnect the battery negative terminal. 2. Disconnect the rear oxygen sensor connector (A). 3...
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch...
Compession Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Make sure the oil in the crankcase is of the correct viscosity and at the correct level and that the battery is correctly charged...