| Circuit Diagram |

| Fail-Safe Mode |
| Item | Fail-Safe |
| Output Voltage (V) | 12 |
If the fuel pressure sensor malfunctions, it enters fail safe
mode. This means that the fuel pressure rises to match the increasing
value of the current level and the pressure in the low pressure fuel
line remains static despite the rising fuel pressure.
|
Fuel Pressure Sensor (FPS) Repair proceduresInspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Check the output voltage of fuel pressure sensor (FPS). Specification : Refer to “Specification” Removal 1...
Removal Engine removal is required for this procedure. (Refer to Engine and transaxle assembly removal in this group) 1. MT : Remove the flywheel. (Refet to Cylinder Block - "Flywheel") 2. AT : Remove the drive plate. (Refet to Cylinder Block - "Drive Plate") 3...
Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the front door lock (A). Tightening torque : 6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft) 3. Remove the front door outside handle (A) by sliding it rearward...