| Inspection |
| 1. |
Remove the left luggage side trim.
(Refer to Body - "Trunk Trim") |
| 2. |
Loosen the fuel filler actuator mounting bolts (2EA).
|
| 3. |
Remove the fuel filler door release actuator (B) after disconnecting the fuel filler door release actuator connector (A).
|
| 4. |
Check for continuity between terminal No. 1 and No. 2. If
there is no continuity, replace the fuel filler door release actuator
(A).
|
C..
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: Refer to “Specification” Removal 1...