| Replacement |
|
| 1. |
Remove the center pillar lower trim.
(Refer to Interior Trim - "Center Pillar Trim") |
| 2. |
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim") |
| 3. |
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
|
| 4. |
After disconnecting the connectors (A) by pushing the lock
pin, loosen the mounting bolts, and then, remove the front seat belt
retrator (B).
|
| 5. |
Install in the reverse order of removal.
|
Inspection [Motor] 1. Turn ignition switch OFF. 2. Disconnect the EWGA connector. 3. Check that the EWGA is stuck by foreign material. 4. Measure resistance between motor (+) and (-) control terminals of the motor. 5. Check that the resistance is within the specification...
Replacement 1. Pull down front door window glass by pressing the power window glass switch. 2. Remove the front door belt outside weatherstrip (A). 3. Install in the reverse order of removal. • Replace any damaged clips...