| Replacement |
|
|
| 1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly") |
| 2. |
Remove the front seat outer shield cover.
(Refer to Front Seat - "Front Seat Outer Shield Cover") |
| 3. |
Remove the front seat shield inner cover.
(Refer to Front Seat - "Front Seat Shield Inner Cover") |
| 4. |
Remove the front seat headrest (A).
|
| 5. |
Remove the elastic strap (A) from the cushion frame.
|
| 6. |
Remove the front seat back board (A).
|
| 7. |
Remove the front seat air ventilation seat back duct (A).
|
| 8. |
Turn the front seat back cover inside out. Then pull out the
headrest guides (A) while pinching both side of the lower part of the
guides, and remove them.
|
| 9. |
Pull out the protecter (A) by the front seat back frame.
|
| 10. |
Remove the front seat back cover (A) from the front seat back frame.
|
| 11. |
After removing the velcro tape (A) and clips (B) on the front of seat back and remove the front seat back cover (C).
|
| 12. |
Install in the reverse order of removal.
|
Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module). The engine operating conditions (speed, load, warm-up condition, etc...
C..