| Replacement |
| 1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim") |
| 2. |
After loosening the mounting screws, then remove the front door inside handle (A).
|
| 3. |
Install in the reverse order of removal.
|
Front Door Trim Repair proceduresReplacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage...
Replacement 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Lift the vehicle. 3. Remove the rear-left wheel & tire and house cover. 4. Disconnect the canister close valve connector (A). 5. Disconnect the vapor hose (B)...
Removal 1. Disconnect the battery negative terminal. 2. Loosen the alternator tension adjusting bolt (A) to loosen tension. 3. Remove the drive belt (A). Inspection Drive Belt Inspection Visually check the belt for excessive wear, frayed cords etc...