| Description |
| 1. |
The ESP OFF switch is for the user to turn off the ESP system. |
| 2. |
The ESP OFF lamp is on when ESP OFF switch is engaged. |
Repair proceduresRepair procedures ESP System bleeding This procedure should be followed to ensure adequate bleeding of air and filling of the ESC unit, brake lines and master cylinder with brake fluid...
ESP OFF Switch Repair proceduresInspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. 3. Check the continuity between the switch terminals as the ESP OFF switch is engaged...
Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, separate the center fascia panel (A). 3. Remove the center fascia panel (A) after disconnect the connector. 4. Remove the AVN keyboard unit (A) after loosening the screws...
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk lid panel. (Refer to Body - "Trunk Lid Trim") 3. Remove the license lamp after disengaging the license lamp mounting clip (A). 4. Remove the license lamp assembly after disconnect the license connector (A)...