| Removal and Installation |
| 1. |
Remove the drive belt.
(Refer to Timing System - "Dreve Belt") |
| 2. |
Remove the alternator.
(Refer to Engine Electrical System - "Alternator") |
| 3. |
Remove the alternator bracket (belt tunsioner) (A).
|
| 4. |
Install in the reverse order of removal. |
Inspection [Motor] 1. Turn ignition switch OFF. 2. Disconnect the EWGA connector. 3. Check that the EWGA is stuck by foreign material. 4. Measure resistance between motor (+) and (-) control terminals of the motor. 5. Check that the resistance is within the specification...
C..