Hyundai Sonata: Engine Control System / Heated Oxygen Sensor (HO2S) Specifications

Specification
HO2S [Bank 1/Sensor 1] (Linear type)
Item
Specification
Heater Resistance (?)
2.4 ~ 4.0 [20°C(68°F)]

Item
Specification
Heater Resistance (?)
Approx. 9.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2] (Binary type)
A/F Ratio (?)
Output Voltage(V)
RICH
0.6 ~ 1.0
LEAN
0 ~ 0.4

Item
Specification
Heater Resistance (?)
Approx. 9.0 [20°C(68°F)]

Heated Oxygen Sensor (HO2S) Description and Operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in ...

Heated Oxygen Sensor (HO2S) Schematic Diagrams
Circuit Diagram ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Wheel Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     When using an impact gun, final tightening torque should be checked using a torque wrench. Run out inspection 1. Jack up the vehicl ...

Hyundai Sonata LF 2014-2019 Service Manual: Starter Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Remove the battery tray. (Refer to Engine Electrical System - "Battery") 3. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 4. Disconnect the starter cable (B) from the B te ...

© 2018-2025 www.hsonatalf.org