| Description |
| 1. |
The ESP OFF switch is for the user to turn off the ESP system. |
| 2. |
The ESP OFF lamp is on when ESP OFF switch is engaged. |
Repair proceduresRepair procedures ESP System bleeding This procedure should be followed to ensure adequate bleeding of air and filling of the ESC unit, brake lines and master cylinder with brake fluid...
ESP OFF Switch Repair proceduresInspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. 3. Check the continuity between the switch terminals as the ESP OFF switch is engaged...
Components 1. Turbo manifold gasket2. Turbo manifold module3. Turbo charger coupler4. Turbo charger coupler & gasket5. Oil feed pipe & hose assembly6. Oil drain pipe assembly7. Turbo manifold module heat protector8. Turbo charger water pipe & hose assembly9...
Removal • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s). • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor...