| Description |
| • |
Components location : DCT (Dual Clutch Transmission)
|
| • |
Function
The clutch actuator receives signals from the Transmission Control Module (TCM) and controls the clutch. |
Removal 1. Disconnect a boots from the console upper cover. 2. Pull the knob (A) in the direction of "F" and remove the knob. 3. Remove the floor console assembly. (Refer to Body - "Floor Console") 4. Disconnect the connector (A) from the shift lever...
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench [Hex 14] (A). Tightening torque : 4.0 ± 1.0 N.m (0.41 ± 0.1 kgf.m, 2.95 ± 0.72 lbf-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier...