Hyundai Sonata: Dual Clutch Transmission Control System / Clutch Actuator Assembly Specifications
| Specification |
| Item | Condition | Specifications |
| Resistance (line to line) | Motor 1 | 60 m? ±10 % |
| Motor 2 | 64 m? ± 10 % | |
| Rated voltage | 12 V | |
| Max. current | 60 A | |
| Operation condition (°C)°F | -40 ~ 257 °F (- 40 ~ 125 °C ) | |
Clutch Actuator Assembly Components and Components Location
Components
1. Clutch actuator assembly2. Fork cover
...
Clutch Actuator Assembly Description and Operation
Description
•
Components location : DCT (Dual Clutch Transmission)
•
Function
The clutch actuator receives signals from the Transmission Control Module (TCM) and controls the clutch. ...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Boost Pressure Sensor (BPS) Repair procedures
Inspection
1.
Connect a GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the BPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the boost pre ...
Hyundai Sonata LF 2014-2019 Service Manual: Cylinder Block Repair procedures
Removal
Engine removal is required for this procedure.
(Refer to Engine and transaxle assembly removal in this group)
1.
MT : Remove the flywheel.
(Refet to Cylinder Block - "Flywheel")
2.
AT : Remove the drive plate.
(Refet to Cylinder Block - "Drive Plate")
3.
Remove the engine to ...
